新闻资讯

News Center

current position: Home > News Center > Industry Information

Several ways of exercising about the silent cable chain

2022-09-25 23:27:04
times

One: The advertising equipment silent towline moves in the horizontal direction (including the accumulative fitness movement of the plastic towline in the horizontal direction), and the operation mode of this kind of plastic towline exceeds that of the plastic towline The maximum load-bearing length must add support wheels to assist the operation of the plastic towline. In order to ensure the service life of the plastic towline. The bending radius of plastic towline running in the horizontal direction should be reasonably selected according to the specific conditions of obstacles and equipment.

Second: The plastic towline moves vertically (including the accumulative fitness movement of the plastic towline in the vertical direction), the high-speed silent towline of this type of operation mode generally does not need to be added The support wheel, the demand for the bending radius of the plastic towline should also be selected according to the specific software environment of the plastic towline.

Third: Plastic towlines work together in the horizontal and vertical directions. Generally, support wheels are not required for plastic towlines in this type of operation mode. The bending radius of plastic towlines The demand is not too great. How to measure the bending radius of the nylon towline: bend and stretch the nylon towline, find the vertical higher and lower points, and accurately measure the distance between the two nodes. The bending radius of the nylon towline is equivalent to half of the correct measurement diameter. 3. The total bending height of the nylon towline = bending radius * 2 + the outer height of the nylon towline, such as the plastic nylon towline 35*75 model specification, where the height is 25mm and the outer height is 55mm. Then it has a bending radius of 75/100/125/150/200 and so on. For example, the half-warp is 75, the inclination of the bottom line is 205, the calculation formula is half-longitude 75×2, and then the outer height is 55, and the result shows 205mm. On the contrary, to calculate the half warp of the plastic drag chain is to measure the total slope height, subtract the outer height, and then divide it by 2, which is the half warp.

How to fix the front and rear ends of the bridge-type silent towline: When decorating the plastic towline, you should choose a suitable connector, and choose a more suitable connector according to the needs of the application. Make a detailed interpretation of the installation specifications required for the connector to be fixed, and choose a more suitable installation method to fix it. The cable must be able to shake freely in the plastic drag chain, and pay special attention to observing the plastic hose when the equipment is moved. The part of the cable terminal should have no relative speed, so as to prevent the cables from being entangled, damaged, broken, hooked and scattered.

Several ways of exercising about silent drag chains

Tags

Previous:None

Recently Viewed:

Related products

news.related_news

NINGBO LOTUS ELECTRIC APPLIANCES CO.,LTD.

Miss Yuan, Sales   13884427405

Ms. Tu, Sales   13606599141

Mr. Yuan, Technical   13705843056

Landline:0574-62595191

                 0574-62592009

Fax:0574-62595173

E-Mail:1766061916@qq.Com

Website:Http://www.yyjiefeng.Com

Address:No. 30, Rongyao Road, Lizhou Street Industrial Park, Yuyao, Ningbo, Zhejiang Province

message

contact


 

WhatsApp

Swipe

 

Taobao Store