How much do you know about the selection principles and uses of unenclosed cable chain?

Selection criteria for nylon unenclosed towline:

Ground height: Select the built-in cables, oil pipes, air pipes, water pipes, etc., as a reference height, plus at least 10% of the height of the indoor space as The inner height of the drag chain is hi. If it overlaps, use the specific height after overlapping as the reference height.

Inner width: Select thicker cables, oil pipes, air pipes, water pipes, etc., and the sum of their diameters is used as a reference for the inner width of the drag chain, and leave at least 10% The total width of the interior space.

Bending radius: Choose the largest bending radius in the built-in cables, oil pipes, air pipes, etc. as the test value, and leave more than 10% of the space.

Standards for placing cables, oil pipes, water pipes, and air pipes inside the drag chain

15% of the usable space should be reserved, so that the built-in cables and oil pipes can move freely, and there will be no tensile force on the drag chain in the semi-longitudinal direction

Power lines with a larger hole diameter should be paved separately, and the net weight should be evenly distributed. If necessary, separate bridge-type non-enclosed cable chain with spacers.

◆In mobile or high-frequency operation, try to separate the wires from each other to a certain extent, and do not have to juxtapose them with each other. In the case of more cables, air pipes, oil pipes, etc. A spacer can be used below.

The usefulness of drag chain:

◆Applicable to places with repeated movements, it can act as a traction belt and buffer for built-in cable oil pipes, air pipes, pipes, etc.

◆Each section of the towline can be opened, which is conducive to the assembly and maintenance of the movement of the miniature unclosed towline, low noise, wear resistance, and fast fitness movement.

Cable chain have been widely used in CNC lathes, electronic products, woodworking machinery, glass machinery factories, window and door machinery, plastic machines, mechanical arms, lifting and conveying equipment, Automatic warehouse, etc.